Jeff Ingram Wrecker Sales Inc.

  • 1677 Dancy Blvd
  • Horn Lake, MS 38637
  • Call Us: 1 (662) 280-6761
  • http://www.wrecker-sales.com/
Print This Page

2025 Miller Industries 30 Series LCG® DRW-LCB

Information

2025 Miller Industries 30 Series LCG® DRW-LCB

Miller Industries has introduced a new LCG® (Low Center of Gravity) Industrial Carrier. The LCG® carrier is available in deck lengths from 26’ - 30’ with deck capacities of 30,000 lb or 40,000 lb.

The carrier uses a revolutionary new patent pending subframe design that allows the carrier deck to sit 6” to 8” lower than conventional industrial carriers. The low deck height allows for the transport of many loads that would be over height on a traditional industrial carrier and would need to be hauled on a trailer. Additionally the LCG® Carrier is more stable against sway and rollover with heavier loads and provides a load angle as low as 11° making it ideal to load equipment and machinery. The operator is able to secure most loads from the ground without the need to climb up on the deck.

Features may include:

  • Full Length Sub Frame with Slide Pads
  • Driver's & Passenger Side Chain Trays
  • Six Tie-Down Points (2 Front, 4 Rear)
  • Two Front Safety Chains
  • Winch Air Clutch Release
  • Dual Lift Cylinders
  • Roller Bed Positive Lock-down
  • Back-Up Alarm
  • Mud Flaps
  • Painted with Black Acrylic Urethane
  • Hydraulic Dock Stabilizer
  • Floor Level Sides, with Stake Pockets
  • 20,000 lb Hydraulic Winch & Cable
  • Bed Anti-Tilt Feature
  • Dual Extension Cylinders
  • Dual Illuminated Controls

Photos

Highlights

  • Horn Lake, Mississippi
  • 2025
  • Miller Industries
  • 30 Series LCG® DRW-LCB
  • Bed Rails: 7” Fabricated
  • Available
  • Bed: 102”
  • Typical Truck Frame: 39” — 42” | above Chassis Frame—Steel: 9” | Chassis Frame—Wood: 10”

Specifications

  • 2025
  • Miller Industries
  • 30 Series LCG®
  • DRW-LCB
  • Utility
  • Sub: 6” x 3” x 3/8”
  • Minimum Distance Required between Inside: 49 | Lift Rating—Extended: 10,000 lb | Lift Reach: 59” or 77"
  • Dual Aluminum
  • 295/75R 22.5
  • 295/75R 22.5 | Axle: 275/80R 22.5
  • Bed Crossmember Size 8" OC Corten Tubes: 3” x 3” | Subframe Hinge Pin Diameter: 2”
  • Tandem Axle: 26’, 27’, 28’, 29’, 30’ | Tri-Axle: 26’, 27’, 28’, 29’, 30’
  • Typical Truck Frame: 39” — 42” | above Chassis Frame—Steel: 9” | Chassis Frame—Wood: 10”
  • Bed: 102”
  • Bed Rails: 7” Fabricated
  • Slideback Cylinders: 4” x 2” x 132” (2)
  • Slideback Cylinders: 4” x 2” x 132” (2) | Tilt Cylinders: 4 1/2” x 2” (2)
  • 1/4”
  • 30,000 lb
  • Rating: 30,000 lb
  • 11,200 lb
  • Strength RBM Each Rail: 3,000,000 in/lb
  • Recommended: 50,000 lb — 66,000 lb