2025 Miller Industries 20 Series LCG® Base

Information

2025 Miller Industries 20 Series LCG®

The 20 Series LCG® Carrier uses a patented subframe design that lowers the deck 4” to 6” than compared to most industrial carriers. The lower deck provides:

The 20 Series LCG® is designed for a chassis with either Single or Tandem Rear Axles and Dual Rear Wheels. Deck Lengths are available from 24’ to 30’.

Features may include:

  • Full Length Subframe
  • Full Length Subframe Wear Pads
  • Painted w/Black Acrylic Urethane
  • Driver & Passenger Side Chain Trays
  • LED Lights
  • Hydraulic Pump
  • 7 Tie-Down Points (2 front, 5 rear)
  • Floor Level Sides, w/Stake Pockets
  • Two Front Safety Chains
  • Bed Anti-Tilt Feature
  • Dual Tilt Cylinders
  • Dual Bed Extension Cylinders
  • Roller Bed Positive Lock-down
  • Dual Illuminated Controls
  • Back-Up Alarm
  • Hydraulic Dock Stablizer

Photos

Highlights

  • Horn Lake, Mississippi
  • 2025
  • Miller Industries
  • 20 Series LCG® Base
  • Platform: 6”
  • Available
  • Platform (Outside): 102” | Platform (Inside): 97”
  • Deck Height Above Chassis Frame Steel: 7 3/4” | Deck Height Above Chassis Frame Wood: 8 3/4”

Specifications

  • 2025
  • Miller Industries
  • 20 Series LCG®
  • Base
  • Utility
  • Sub: 5” x 3” x 1/2” H.S. Tube
  • Platform Floorplate: 3/16”
  • Lift Rating: 4,000 lb – 6,000 lb | Extended
  • Platform Thickness: | Cable: 12,000 lb Winch 7/16” x 50’ / 15,000 lb Winch 1/2” x 50’ / 20,000 lb Winch 9/16” x 75’ | Crossmembers: 3” x 3” Corten Tube | Crossmember Spacing: 8” on Center | Cable: | Body Sides: 6” x 4” x 3/8” Angle
  • Deck Height Above Chassis Frame Steel: 7 3/4” | Deck Height Above Chassis Frame Wood: 8 3/4”
  • Platform: 24’, 25’, 26’, 27’, 28’, 29’, 30’
  • Platform (Outside): 102” | Platform (Inside): 97”
  • Platform: 6”
  • Bed Tilt Cylinders: 4” Bore
  • Bed Extension Cylinders (2): 3 1/2” x 120” Stroke
  • Rating: 10,000 lb – 20,000 lb
  • Load Rating: 20,000 lb | Winch (First Layer):