|
|
 |
|
|
|
|
 .
Standard Equipment Optional
Equipment Specifications
Chassis Recommendations Back to Product Line
|
|
LASTING
PERFORMANCE |
|
Vulcan has earned the reputation as one of the most trusted names in the towing and
recovery business. Our line of Series 20 carriers is just another example of the
pride we take in that reputation. The Series 20 is available in deck lengths from 19
through 30 foot in length with a 20,000 lb. deck capacity to handle a wide range of
loads. These rugged carriers are available with many options to meet your specific
transport needs. These options include your choice of wood or steel decks, an
independent hydraulic wheel lift, dock stabilizer, removable side rails, stake pickets
with an outside rub rail. For rental, construction, agricultural equipment, or
vehicles, you can depend on Vulcan for a full line of carriers to provide you with long
lasting performance even under the most severe conditions.
Note: Some optional equipment may be shown.
|
VULCAN 20 SERIES CARRIERS - STANDARD EQUIPMENT |
| Front and rear sill reinforcements |
Heavy duty approach plate with 4 chain
locks |
| Full length reinforced rail subframe |
Federal standard 108 shock mounted
lighting |
| Body lock |
8,000 lb. hydraulic winch with 3/8 x
50 ft. cable |
| Illuminated dual controls |
Lubrication fittings on all pivot
points |
| Tow light plug |
Pilot operated holding valves on
tilting and lifting functions |
| Mudflaps |
Full length body slide pads |
| Mechanical anti-tilt system |
Water resistant junction box for wire
harness connection |
| 3/16" smooth floor plate on steel
bodies |
|
VULCAN 20 SERIES CARRIERS - OPTIONAL EQUIPMENT |
| Additional chain locks |
All steel cab protectors |
| Hydraulic planetary winch |
Winch free-wheel extension handle |
| 8 cu. ft. water resistant aluminum tool box
|
4 cu. ft. aluminum tool box with shelf |
| Factory installation |
Bi-directional shaft-driven pump - 28 or 18 GPM |
| Direct mount pump/PTO |
5, 6, 7.5 and 10 ton winches |
| 3/16" deck plate |
1/4 smooth or deck plate |
| Apitong wood floor |
Hydraulic dock stabilizer |
| Hydraulic wheel lift |
Hydraulic tow bar |
| Removable side rails |
Stake pockets with outside rub rail |
| Cable tensioner |
Magnetic tow lights |
| Cable roller guide |
J-Hook chains |
| Bar light |
Front hookup chains |
| Work lights |
Switch panel |
| Many other Popular Vulcan Options |
| Note: Some option selections may
not be compatible in certain configurations. |
VULCAN
20 SERIES CARRIERS - SPECIFICATIONS |
| Deck Length |
19' to
30' |
| Steel Body Width |
92 I.D.
x 98 O.D. |
| Body Extension |
117" |
| Tow Bar Reach |
41" |
| Wheel Lift Reach |
64" |
| Control Valve |
Sectional, 20 GPM. 1700 PSI |
| Oil Reservoir |
12
gallons (low mount winch)
24 gallons (upright winch) |
| Oil Filter |
|
250
PSI, 10 Microns |
| Pump |
18 or
28 GPM |
| Winch |
4, 5,
6, ton (low mount)
7.5 and 10 ton (upright)
|
| Body Rating * |
20,000
lbs evenly distributed |
| Tow Bar Rating * |
3,500
lbs. extended |
| Wheel Lift Rating * |
4,000
lbs. extended |
| Minimum Load Angle ** |
13° at
35" frame height |
* Load ratings
** Load angle varies with frame height and carrier length. Lower frames and
longer carriers will
produce lower load angles. |
VULCAN 20 SERIES CARRIERS - CHASSIS RECOMMENDATIONS |
Minimum GVWR
Maximum GVWR
Accessible PTO Opening
Maximum Frame Height
Minimum Frame Height
Consult the Factory for minimum frame RBM and cab to axle requirements |
23,000
lbs.
33,000 lbs.
42 inches
38 inches
|
Note: Ratings are based on structural factors only - not chassis capacity. Vulcan reserves
the right, without notice and without obligation, to improve or modify products, which may change the specification, models and
feature availability. |
|
|
Contact Jeff Ingram, Sales and
Service Representative at
1-662-280-6761 M-F 8AM - 5PM CST.
Toll Free 1-866-280-6761 - Fax 1-662-280-6875
Email Us Anytime
Jeff@Wrecker-Sales.com
|
|
|
|
|
|
|
