WRECKERS For Sale,wrecker accessories,wrecker parts WRECKERS For Sale,wrecker accessories,wrecker parts
WRECKERS For Sale,wrecker accessories,wrecker parts


1677 Dancy Blvd.
Horn Lake, MS 38637
Toll Free 1-866-280-6761
MS 1-662-280-6761  Fax 1-662-280-6875

WRECKERS For Sale,wrecker accessories,wrecker parts


New & Used Heavy Duty Wreckers

Used Light and Med. Duty Wreckers

Used Carriers

New Wreckers & Carriers

Towing Access.







Click here to view this product's brochure


Century 's 20 & 30 series carriers have long set the industry standard for hauling heavy equipment.  At Century we believe that providing you with the best equipment with a variety of options allows you to customize your equipment for your needs.  Options such as: various deck lengths, apitong flooring, container packages, and additional key slots make your hauling and load combinations virtually unlimited.  In addition, our durable design provides you with the comfort of knowing that your equipment will be reliable for years to come.  For more information on how adding a Century 20 or 30 series carrier to your fleet can increase your transporting capabilities, visit your local Century distributor. 


 Consolidated Tilt & Full Length Mounting
 Full Length Nylatron Slide Pads
 Black Acrylic Urethane Paint  Driver's & Passenger Side Chain Trays
 Two Front Safety Chains  Positive Lock Down System
 Hydraulic Winch & Cable  Dual Illuminated Controls
 Winch Clutch Release  Back-Up Alarm
 Bed Anti-Tilt Feature  Hydraulic Pump
 Dual Lift Cylinders  Mud Flaps
 One Extension Cylinder  Federal Standard 108 Lighting
 Winch Cable Tensioner
 (Except 20,000 lb. Winch)
 Six Tie-Down Points
 (2 Front, 4 Rear)
 Independent Hydraulic Wheel Lift  Slide in L-Arms, Safety Chains & Wheel
 20,000 lb. Planetary Winch with
 Air Free-Spool
 12 Tie-Down Points
 (4 Per Side, 4 Rear)
  6" On Center Crossmember Spacing  Steel Tube Cab Protector
 Hydraulic Dock Stabilizer  


 Removable Side Rails  Outside Stake Pockets with Rub Rails
 and Pipe Spools
 Tool Compartments  PTO
 Smooth Floor in Lieu of Diamond Plate  Apitong Wood Floor
 Dual Key Slots Down Center
 or Deck Edge
 Additional Key Slots
 Bolt On D-Rings  Stationary Cab Protector
 (Requires 10" Additional CA)
 Wire Mesh in the Cab Protector  Stainless Steel Chain Tray
 (for Stationary Cab Protector)
 Drop Wheel Wells on Deck  Switch Panel
 Work Area & Emergency Lighting  Strap & Bridle Kits
 Tie-Down Chains  Optional Color on Top of Deck and Side Rails
 Winch Cage  Wired or Wireless Winch Remote
 Steel Tube Cab Protector  Dock Stabilizer in Lieu of Wheel Lift
 Independent Hydraulic Stabilizer in Lieu of
 Wheel Lift
 6" on Center Crossmember Spacing
 Heavy Duty Built-Up Kit (Includes Additional
 Crossmembers & 5" Lift Cylinders)
 12,000 lb. Worm Gear Winch
 12,000 lb. Planetary Gear Winch  Trailer Ball Kit for Independent Wheel Lift
 Many Other Popular Century Options  


 Load Rating  20,000 lbs.  30,000 lbs.
 Platform Length  22'  24', 26', or 28'  24', 26', 28' or 30'
 Platform Thickness  3/16" Floorplate  3/16" Floorplate
 Platform Width (Outside)  102"  102"
 Platform Width (Inside)*  98"  98"
 Platform Mainbeam  6" I-Beam  8" I-Beam
 Platform Crossmembers  2"x 4" Cor-ten Steel  2"x 4" Cor-ten Steel
 Crossmember Spacing  8" On Center  6" On Center
 Platform Sides  7" x 4" Angle with
 24" C/C
 7" x 4" Angle with
 24" C/C
 Subframe  5" x 4" x 3/8" Tube  7" x 4" x 3/8" Tube
 Rear Pivot  1 Piece 2" Diameter  1 Piece 2" Diameter
 Winch (1st Layer)  8,000 lb. Worm Gear  20,000 lb. Planetary
 Cable  3/8" x 50'  9/16" x 100'
 Power Lift Cylinders  4 1/2" x 32" Stroke  5" x 32" Stroke
 Extension Cylinder  4 1/2" x 120" Stroke  5" x 120" Stroke
 Wheel Lift Rating  3,500 lbs.  N/A
 Optional Tow Bar Rating  5,000 lbs.  N/A
 * Inside Bed Width Applies to Optional Removable Rails
The ratings specified are based on structural factors only, not vehicle capacities or capabilities.  Platform rating is based on equally distributed load.


 Minimum G.V.W.R.    31,000 lbs.
 Minimum Cab to Axle (clear) 24'  162"
  26'  186"
  28'  210"
 Minimum Frame Height    40"
 Maximum Frame Height    46"
 Minimum Frame Requirements 110,000 PSI with Inverted L Frame*
 Minimum G.V.W.R.    50,000 lbs.
 Minimum Cab to Axle (clear) 24'  142"
  26'  166"
  28'  190"
  30'*** 214"
 Minimum Frame RBM (each) Rail Tandem Axle  
   20 Series    2.5 Million Inch Pounds
   30 Series    3.5 Million Inch Pounds
Minimum Frame Length Behind Center of Rear Axle  60"
 * Reinforcement extended to the rear of the frame
 ** A heavy duty build up kit is available on a singe axle and is required for a 20 Series mounted on a tandem or with an additional axle.
 *** Check state and local road restrictions for maximum vehicle lengths allowed

 NOTE:  All ratings are based on structural factors only, not vehicle capacities or capabilities.
 Specifications shown are approximations and may vary depending on chassis selected.
 Platform rating is based on an equally distributed load.  Actual payload carrying capacity is
 determined by the curb weight of the chassis and equipment and should not exceed the
 GVWR of the Chassis.
 Miller Industries Towing Equipment Inc. reserves the right to change or modify product
 and or specifications without notice or obligation.  Some equipment shown is optional.

Click here to view this product's brochure


Contact Your Sales and Service Representatives at
1-662-280-6761  M-F 8AM - 5PM CST.

Toll Free 1-866-280-6761 - Fax 1-662-280-6875

Contact Your Sales Representatives

  For Your Parts and Service Representative

Email  Jeff@Wrecker-Sales.com


Email  Parts@Wrecker-Sales.com

   or      Dale@Wrecker-Sales.com



©2000  Jeff Ingram Wrecker Sales, Inc.
All Rights Reserved.